LED-5000 Vertical Screen Printing Exposure Units
New Space-Saving CTS Design. This compact, vertical exposing LED-5000 is specifically designed for exposing CTS (computer-to-screen) produced images.The Lawson LED-5000 Vertical Slider simulates a Metal Halide exposure, and is made in the U.S.A. at our St. Louis factory. It uses state-of-the-art technology, yet is still reasonably priced. Rapid exposure (5,000 watt equivalent light) is combined with energy-efficiency, ease-of-use and reliability.
Fast, Energy Efficient Exposure
- Space-Saving Vertical Design
- LED Everlast Lighting Strips (5000 watt metal-halide equivalent)
- Easy-to-Use Control Panel
- Digital Timer
- Programmable Exposure Setting
- Optimal Light Balance for exceptionally even lighting (similar to point-source lighting)
- No Vacuum | No Glass
- Even Light Distribution
- Non-Reflective Exposure Chamber
- 120 Volts; Standard Plug-In Wiring
- 1-Amp Draw (exceptionally energy-efficient)
- Shipped Fully Assembled
- Warranty: 1-Year Parts Warranty*
*Excludes glass and blanket, and user negligence/error
- Export Electrical Components- for 220 volts
Model: #2431 #2536 Exposure Area 23" x 31" 25" x 36" Max Frame Size 23" x 31" 25" x 36" Electrical Specifications 120 volts, 2 Amps
Standard Plug-In Wiring
120 volts, 3 Amps
Standard Plug-In Wiring
Estimated Width x Deep x Height 36" x 28" x 12" 52" x 42" x 15" Estimated Weight 150 lbs 235 lbs Estimated Crated Weight 180 lbs 285 lbs
*Free Ground Shipping on Parts; No Charge Labor for Items Sent Back to St. Louis for Repair or Replacement
*Price, Design, and Technical Specifications Subject to Change Without Notice
LED VS 3/4 ViewShowing the overall unit - compact with user-friendly controls.
LED VS Side ViewShowing the LED-VS from the side
LED-5000 VS (vertical slider) Front ViewHere is the front view of the LED-5000 VS (vertical slider), with the sliding drawer closed. Same control system as the standard Vertical.
LED VS Sliding CTS Imaged Frame in PlaceHere we are showing the LED-VS with the operator sliding the CTS Imaged Frame in place
LED VS Front with Door OpenHere you can see how the screen is loaded in place, and the adjustable frame holder bracket.
LED VS Front with Door OpenShowing the unit with the front door open, and with the LED lights exposing
LED-5000 VS Control PanelHere is a close up of the LED-5000 VS (vertical slider). It is very similar to our standard control system, and is very User-Friendly.
The LED-5000 simulates a Metal Halide exposure, and is made in the U.S.A. at our St. Louis factory. It uses state-of-the-art technology, yet is still reasonably priced. Rapid exposure (5,000 watt equivalent light) is combined with energy-efficiency, ease-of-use and reliability.
Its powerful LED Lamps are rich in UV output and are optically balanced to provide exceptionally rapid exposure, especially with SBQ 1-part emulsions, without undercutting and assuring excellent resolution. Consistent exposure is guaranteed by our electronic countdown timer. Accurate light output is always assured because our specially designed LED lamps are guaranteed to last 3 years without loss of light intensity.
There is no glass or vacuum in this unit, so you'll probably have zero pinholes and fast exposure times, even using less expensive diazo or dual-cure emulsions. The black coating inside the exposure chamber absorbs light, resulting in a smooth, anti-glare background.
The LED-5000 Vertical Slider is a sophisticated, yet easy-to-use exposure unit. The control panel is conveniently located and each function is clearly marked to minimize error.
If you are looking to expose CTS images, and want an alternative to large, bulky and expensive exposure units, but still demand hi-resolution halftone reproduction and sharp-edge definition, then the Lawson LED-5000 Vertical Slider is an ideal solution.
Model: #2431: Exposes a Screen Size up to 24" x 31" O.D.
Model: #2536: Exposes a Screen Size up to 25" x 36" O.D.
Size Specifications for the LED-5000 Vertical Slider:
Model VS: #2431: 18" wide x 36" long x 46" tall
Model VS: #2536: 18" wide x 36" long x 51" tall
These units can be placed right next to your CTS printer, taking up only and extra 13". Move the screen from printer to exposure unit in seconds, and use any type of emulsion, including inexpensive dual-cure emulsion.
120 Volts; Standard Plug-In Wiring.
Custom Sizes & Designs Upon Request