Digi-Star Conveyor Dryer
The Lawson Digi-Star is an energy-efficient convection-air combo dryer that utilizes state-of-the-art curing technology, and is specifically designed to cure digital DTG inks along with water base and plastisol screen printing inks. The Digi-Star Dryer is a "universal live-air" dryer that will even cure solvent-based inks too.
The Cure for Everything
- Floor Model Design
- 24", 36", 48" & 60" Belt Width
- 8' and 10' Long Heat Chamber (depending on size/model)
- 12' or 16' Overall Length
- Digital Temperature Control
- Digital Belt Speed Control
- 2' or 3' In-Feed (depending on size/model)
- 2' Out-Feed (depending on size/model)
- Adjustable Curing Control
- I.R Combo with Jet-Air
- Recirculating Live Jet-Air
- Vacuumized Belt
- Easy, No Tool Lint Trap Filter
- Powered Exhaust
- Double-Insulated Heat/Air Chamber
- "Cool-Touch" Outside
- Direct Drive Conveyor
- Easy Belt Tracking with Arrow Belt™ and Bullesye Conveyor Belt Tracking™
- Heat-Reflective, Memory Belt
- Reflective Infrared Booster
- Intuitive, Easy-to-Use Controls and Diagnostic System
- 120/230 Volts; 1-Phase or 3-Phase (depending on size)
- National Safety Code Compliant/ETL Compliant
- 5-3-1 Premium Lawson Warranty
- Custom Belt Widths
- Custom Belt Lengths (In-Feed & Out-Feed)
- Custom Heat Chamber Lengths
- Cap Side-Mounted I.R. panel (6" x 24")
- Phase Change (1 to 3; or 3 to 1)
- Export Electrics
2412 2416 3612 3616 4816 6016 Estimated Cure/Cycle Times for Water-Base/DTG Ink 30 - 120 seconds 30 - 120 seconds 30 - 120 seconds 30 - 120 seconds 30 - 120 seconds 30 - 120 seconds Overall Length 12' 16' 12' 16' 16' 16' Overall Width 40" 40" 52" 52" 62" 76" Belt Width 24' 24' 36" 36' 48' 60" Overall Height 47" 47" 47" 47" 47" 47" Heat Chamber Length 6' 9.5' 6' 9.5' 9.5' 9.5' In-Feed 3' 3' 3' 3' 3' 3' Out-Feed 3'' 3' 3' 3' 3' 3' Belt Height 34" 34" 34" 34" 34" 34" Split Belt Available Yes Yes Yes Yes Yes Yes Blower(s) CFM 1,500 (1 blower) 3,000 (2 blowers) 1,500 (1 blower) 3,000 (2 blowers) 3,000 (2 blowers) 3,000 (2 blowers) Infra-Red Zones 3 4 3 4 4 4 Air Zones 1 continuous 1 continuous 1 continuous 1 continuous 1 continuous 1 continuous Flue Size 3" (powered exhaust) 3" (powered exhaust) 3" (powered exhaust) (2) 3" (powered exhaust) (2) 3" (powered exhaust) (2) 3" (powered exhaust) I.R. + Convection Air Yes Yes Yes Yes Yes Yes Heater Wattage 9,000 12,000 13.500 18,000 24,000 30,000 AMPS (230 volts) 1/3 Phase 56(1-phase standard) 69(1-phase standard) 62/43 (1-phase standard) 97/85 (1-phase standard 125/92(3-phase standard) 136/104 (3-phase standard) Approximate Crated Weight 1,300 lbs 1,600 lbs 1,600 lbs 2,400 lbs 2,700 lbs 3,000 lbs Approximate Crate Size (W x L x H) 50x156x48 50x204x48 62x156x48 62x204x48 74x168x48 86x204x48
*Free Ground Shipping on Parts; No Charge Labor for Items Sent Back to St. Louis for Repair or Replacement
*Price, Design, and Technical Specifications Subject to Change Without Notice
Digi-Star Control PanelDigital Temperature Control, Digital Belt Speed Control and Display, I.R. Element Control, Diagnostic Control Center and more. Some units have a side-mounted control box with other digital features.
Digi-Star Dual Jet-Air BlowersLargest, Best-In-Class, Blowers for Jet-Air Recirculation and Powered Exhaust.
Digi-Star Exhaust PortsPowered 3" Exhaust Ports wtih Damper Controls.
Digi-Star Lint TrapsLint Traps - easy access and easy clean.
Digi-Star Front 3/4 ViewAnother view of a Digi-Star dryer, featuring a 60" wide belt wtih a custom in-feed of 9'.
Digi-Star 3/4 ViewGeneral 3/4 view of the Digi-Star Universal Air Dryer.
Digi-Star Custom In-FeedThis image shows a custom in-feed length. The Digi-Star Dryer is easily modified so you can have any in-feed or out-feed you want. Maximize workflow flexibility.
Digi-Star Out-Feed and Belt MotorDryer exit and Direct-Drive Motor - no chains or timing belts to grease or adjust. Easy access motor maintenance.
Custom Digi-Star Triple Split Belt DryerThis photo show a custom dryer with 3 independent conveyor belts and independent heat chambers. Maximum versitility is achieved with this high production dryer.
Custom Digi-Star Triple Split Belt Close-UpThis photo shows a custom Digi-Star Triple Belt dryer. The in-feed and out-feed can be made any length your worlflow demands.
Digi-Star 60' Wide BeltAnother view of the Lawson Digi-Star conveyor dryer oven. Great for curing screen printing plastisol, water-based and discharge ink. Can also be used for curing DTG ink of all major brands including Epson, Brother and Anajet.
Digi-Star with Adjustable LegsThis is a Custom Modification, where the client needed their conveyor height to be adjustable.
Let us know your needs, and we can design and build what you want!
Digi Star 2412 In ActionThe Digi-Star in production curing DTG printed shirts on polyester.
Digital temperature readout with warning system to alert you of temperature changes. Independent heater controls that lets you turn off zones for short runsLarge industrial powered exhaust blowers to ensure a thorough cure of plastisol inks, water-based inks, & DTG inks. The high powered air a prevents garment scorching
Easily accessible hinged top for access to service your machine without having to undo wires
Digital temperature readout with warning system to alert you of temperature changes. Independent heater controls that lets you turn off zones for short runs
Large industrial powered exhaust blowers to ensure a thorough cure of plastisol inks, water-based inks, & DTG inks. The high powered air a prevents garment scorching
A completely adjustable in/out feed. Various belt widths available as are split belt options
The Digi-Star combines color-blind infrared with a blanket of recirculating jet-air. It's compact design allows for maximum production in a small amount of space.
The Digi-Star is so energy efficient, the warm-up time is only 10 minutes.
The Digi-Star is ideally suited for curing digital inkjet DTG prints for the textile industry. The Digi-Star can handle DTG prints from any brand direct to garment printer including: Epson F2000, Epson F2100, Brother GTX, Brother GT-3, Anajet, Kornit and more. Many DTG printers utilize a split belt, or multiple belt, chamber to increase production and vary the drying time depending on variable factors, such as shirt color, ink deposit, garment type and pre-treat deposit.
The Digi-Star may also be used with plastisol, water-based and all direct-to-garment inks. The Lawson Digi-Star great for production applications where space is at a premium and true convection air is beneficial.
As with all Lawson equipment, the Digi-Star is part of Lawson's unique Trade-In, Trade-Up program, so you never have to worry about out-growing your dryer. This unit will provide the professional results your customers demand for properly cured DTG garments, and all types of plastisol and water base ink.
24" wide belt x 12' Long
24" wide belt x 16' Long
36" wide belt x 12' Long
36" wide belt x 16' Long
48" wide belt x 16' Long
60" wide belt x 16' Long