Skip to product information
1 of 5

Workhorse Wash-IT ARS Screen Reclaimer

Workhorse Wash-IT ARS Screen Reclaimer

Workhorse Products

SKU:

×

Got a question about Workhorse Wash-IT ARS Screen Reclaimer?

Payment & Security

Payment Methods Accepted

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Shipping, Crating, and Packaging Fees

Additional Shipping & Crating Fees

Lawson made equipment comes with a Shipping and Crating Charge that is not included in the price shown and will not be reflected in your order's total. We will contact you after order completion with a final cost.

Download Product's PDF Brochure

Financing Options

Need to finance the Workhorse Wash-IT ARS Screen Reclaimer? No problem! Visit our Financing Page for more details.

Got a question about this product?

View full details

Description

The Workhorse Wash-IT ARS is an all-electric automatic screen reclaimer from Lawson Workhorse Group. Incorporating the Workhorse Wash-It ARS helps keep your screen room clean by containing overspray and significantly reducing chemical vapor. The unit works in conjunction with a dip tank to automate the messiest and worst part of screen cleaning. It also improves efficiency and produces consistent results. Since the pressure cleaning is standardized with moving nozzles, anyone can reclaim screens with minimum training and no experience.

The Wash-It ARS pressure washes away emulsion from 20" x 24", 23" x 31" or 25" x 36" frames. It can even do two, 20" x 24" frames at once. The unit runs on 220 V single-phase power with no air compressor, and is rated for up to 240 screens per 8-hour shift.

Optional filtration unit is available or easily tie-in the exit spout to your existing plumbing.

The Simple 2-Step Process for Ultimate Screen Cleaning:

  1. Prep and Load: Card off excess ink, remove tape and place your screens in your dip tank. Place up to two 20" x 24" screens or a single screen (up to 25" x 36") inside the reclaimer, set your desired number of passes and pass speeds, and prepare the next screen while the machine runs.
  2. Automated Cycle: Run the all-electric, high-pressure spray cycle (typically 1–2 minutes) to remove emulsion. If needed, remove screen, spray on additional ink or haze remover and run the cycle again.

The LWG Difference

  • Dual-Function Reclamation & Development: Versatile spray chamber functions both as a high-pressure screen reclaimer or an exposure developing station.
  • High-Efficiency Shift Output: Capable of processing up to 240 screens per 8-hour shift to keep high-volume production facilities running smoothly.
  • All electric machine - no air compressor needed.
  • Custom Environmental Configurations: Fully customizable with optional septic-safe filtration systems, water recycling setups, and inspection booths.
  • Comprehensive Factory Backup: Supported by LWG with expert technical guidance, equipment installation assistance, and direct replacement parts distribution.

Features

  • All-Electric Operation: Eliminates air compressor dependency, running entirely on an electric industrial motor and pump architecture.
  • Variable High-Pressure Spray: Adjustable water pressure system delivers tailored output for sensitive stencil development or tough emulsion removal.
  • Dual-Screen Capability: Holds single frames up to 25" x 36" or dual 20" x 24" screen printing frames simultaneously.
  • Space-Saving Compact Footprint: Fits easily into small shop layouts and tight wet-room spaces.
  • Heavy-Duty Spray Chamber: Constructed for chemical resistance and long-term durability under continuous exposure to washout chemicals.

Media & Videos

Specifications Table

Specifications | Description
Estimated Production | up to 240 screens per shift (8 hours)
Est. Overall Width | 52"
Est. Overall Depth | 34"
Est. Overall Height | 50"
Electrical Requirements | 220 volts; 1-Phase, approximately 22 amps
Air Requirements | None - all electric
Water Requirements | 3/4" minimum water line - 1" recommended

Comparison Table

Feature / Metric | Workhorse Wash-IT ARS | wash-and-go-screen-reclaimer | Standard Manual Washout Sink
Operation Type | Semi-Automated High-Pressure Chamber | Fully Automated Enclosed Wash & Go System | Manual Handheld High-Pressure Wand
Air Compressor Requirement | None (100% Electric Pump) | Pneumatic / Air System Assist | None Required
Estimated Output | Up to 240 Screens / Shift | High-Volume Automated Batch Production | Varies by Manual Operator Speed
Screen Capacity | 1x Frame up to 25" x 36" or 2x 20" x 24" | Standard Commercial Frames | Single Manual Screen Placement
Footprint Size | Compact 52" W x 34" D x 50" H | Full In-Line Equipment Footprint | Compact Open Washout Sink
Target Facility Level | Mid-to-Large Automated & Manual Shops | High-Volume Industrial Screen Plants | Entry-Level to Mid-Size Custom Shops

Questions & Answers

Q: How many screens can the Wash-IT ARS clean per shift?
A: Up to 240 per 8-hour shift, about 30 an hour, using a typical 1 to 2 minute cycle and loading two 20 × 24 in frames at once.

Q: Does it need an air compressor?
A: No. It runs on an electric motor and pump.

Q: What frame sizes fit?
A: One frame up to 25 × 36 in, or two 20 × 24 in frames at the same time.

Q: Can it reclaim and develop?
A: Yes. Pressure is adjustable, from gentle stencil washout to full emulsion removal.

Q: What utilities does it need?
A: 220 V single-phase at about 22 A, and a water line of at least 3/4 in (1 in recommended).

Q: How much space does it take?
A: About 52 in wide, 34 in deep and 50 in tall.

Q: Can I add filtration or water recycling?
A: Yes, septic-safe filtration, recycling setups and an inspection booth are options. [State what the base price includes.]

Q: What chemistry do I use?
A: You must use a dip tank and a dip tank solution. We recommend One Step concentrated dip tank formula. A separate ink degradent or haze remover may be necessary.

Q: How does it differ from a pressure washer and washout booth?
A: The spray is enclosed, so overspray stays inside, and the operator preps the next screen while it runs.