Prestige R2 Pro DTF Printer Bundle: Compact and Cost-Effective
The Prestige R2 Pro DTF Printer Bundle provides a complete direct-to-film (DTF) printing solution, including the Prestige R2 Pro DTF Printer, a choice of Miro 13 Max or Seismo M16 DTF Powder Applicator and Dryer, and essential DTF supplies. This package streamlines your workflow for professional results in a compact setup.
Prestige R2 Pro DTF Printer
The Prestige R2 Pro DTF Printer is a 13-inch printer with dual Epson i1600 printheads, delivering vibrant, sharp prints at 30–35 square feet per hour. Ideal for intermediate users seeking professional-quality results, it balances performance and affordability.
Automatic Powder Shaker/Applicator Options
The Intermediate Bundle includes the Miro 13 Max DTF Powder Shaker and Dryer. This compact, energy-efficient 13" shaker suits small spaces with 120-volt power. Its optimized heating system ensures even curing with low power consumption, and a built-in air and smoke purifier eliminates the need for an external unit. With an intuitive control panel and alignment markings for precise media feeding, it supports true A3 width prints up to 13.78". Full technical support includes videos and direct messaging with USA-based technicians.
The Premium Bundle includes the Seismo M16 DTF Powder Applicator and Dryer. This compact, affordable machine is designed for entrepreneurs with limited space and budget. It combines powder shaking and film curing with a 16-inch media width for larger designs. Its user-friendly control panel and even powder shaking mechanism ensure high-quality, uniform prints. Built for durability and low-noise operation, the Seismo M16 enhances efficiency.
The Premium Bundle also includes the Purifier L2 Portable Air Filter. Designed for mid- to high-volume DTF printing, it offers a 99.97% purification rate for gases and dust. Its 47.25-inch flexible hose, compact, lightweight design, and quiet operation at under 50 dB ensure a clean, safe workspace. Replacement filters are available to maintain performance.
Intermediate Bundle Includes:
- Prestige R2 Pro DTF Printer
- neoStampa RIP Software
- Miro 13 Max DTF Powder Shaker and Dryer
- Lawson Hybrid Warm/Cold Peel DTF Film
- Color Max Inks (CMYK+W, 2 lbs)
- Lawson DTF Heat Transfer Powder
- Prestige DTF Printer Cleaning Solution (250ml)
- Isopropyl Alcohol (16oz)
- Lintless Wipes (4x4, 30 units)
- Cleaning Swabs (7", 50 units)
Premium Bundle Includes:
- Prestige R2 Pro DTF Printer
- neoStampa RIP Software
- Seismo M16 DTF Powder Applicator and Dryer
- Purifier L2 Portable Air Filter
- Lawson Hybrid Warm/Cold Peel DTF Film
- Color Max Inks (CMYK+W, 2 lbs)
- Lawson DTF Heat Transfer Powder
- Prestige DTF Printer Cleaning Solution (250ml)
- Isopropyl Alcohol (16oz)
- Lintless Wipes (4x4, 30 units)
Prestige R2 Pro DTF Printer
The Prestige R2 Pro DTF Printer is a compact yet powerful 13" machine designed for intermediate users seeking professional-quality prints at a competitive price. Equipped with dual Epson i1600 print heads, it delivers vibrant, crisp prints at speeds of 30-35 sq. ft. per hour. Ideal for DTF printing, the R2 Pro features a White Ink Management System to maintain white ink, an Automated Cleaning System for printhead maintenance, and an Automatic Film Sensor that halts printing when film runs out. With 1-liter bulk ink cartridges for fewer changes, this printer balances speed, efficiency, and affordability, making it a top choice for production-level printing.
Discover the power of the Prestige R2 Pro DTF Printer
Click Here for more info!
Miro 13 Max Automatic DTF Powder Shaker and Dryer
Features
The Miro 13 Max Automatic DTF Powder Applicator and Dryer is a compact, 13" wide shaker that's perfect for those with limited space and only 120-volt power. Its patented built-in air purification system ensures a safe, smoke-free workspace without the need for an external purifier. The bottom platen heating delivers even, consistently cured transfers, while the curved heating platen allows media to flow smoothly through the shaker. Alignment markings help ensure accurate media feeding, and it accommodates true A3 width prints, handling up to 13.78" (35 cm) media for versatile production.
Check out the Miro 13
Click here for more details!
*** See included supplies for more bundle information***
Color Max DTF Ink
Features:
- Engineered for DTF printing
- Even and consistent texture without any loss in color vibrancy
- High color density and wide color gamut
- Pairs well with DTF Powder and DTF Film
Benefits:
- Consistent and professional print quality
- Tailor-made for reliable DTF printing results
Specifications:
- Size available - 2lbs
- Colors available - CMYKW
neoStampa Software
The neoStampa RIP Software is the ultimate choice for direct to film printmakers. With a powerful suite of features, it stands out amongst its peers for its convenience and maximum efficiency. Enjoy a single Direct to Film software package and discover the power today.
Hybrid Warm and Cold Peel DTF Heat Transfer Film
Experience the versatility of our Hybrid Warm/Cold Peel Direct-to-Film Film! Our DTF transfer film is perfect for both warm and cold peels, making it a must-have for any garment. Made to be compatible with cotton, polyester, and more, this film is a game-changer in the world of transfers.
Lawson's Hybrid Warm and Cold Peel film combines two great options into one choice. Use the warm peel feature when you want faster production and a softer hand (feel) to your finished press. Or, peel these DTF transfers cold to get an even brighter, more vibrant color on your tshirt, hoodie or tote bag.
Directions - How to Apply the DTF Transfer Hot Peel Film
- DTF powder to the printed film.
- Once your image is on the film and the DTF powder is applied and cured, set your heat press somewhere between 275 - 300 degrees.
- Place the DTF transfer on your garment, powder side down. You may cover with a piece of DTF Transfer paper to protect your heat press if you want.
- Press for about 12 - 17 seconds with medium/heavy pressure, depending on temperature and garment.
- Lift up the heat press. For the warm press, wait approximately 3 seconds and then peel. For the cold press, allow the transfer to become cold.
- For a softer feel, after peeling the paper, place a teflon sheet over the image and press for about 5 seconds with medium pressure.
These directions were created using Lawson's DTF Transfer Powder and Lawson's DTF Film. Using other brands many vary these instructions. Testing prior to production is always recommended.
Lawson DTF Heat Transfer Powder
This Direct-to-Film (DTF) heat transfer powder (Transdust Transfer Powder) is a universal powder that works with white and black garments. This polyurethane hot-melt powder has special dye-migration blockers so it can work on dark color polyester shirts. With a low melt point, Lawson's DTF transfer powder applies with a lower temperature and quick heat press onto the garment.
Lawson Transfer DTG Powder is Oeko-Tex Eco Passport Certified.
How to Use - Directions for Use
- Print DTF ink onto your DTF Film.
- Coat ink and film in Lawson's DTF powder.
- Shake off excess powder.
- Set your heat press to 325 - 350 degrees and hover heat press over the film for about 2.5 - 3 minutes to melt the powder. You want the powdered glue to melt evenly. For a quicker melt, use the American DTF Cure Box or Kick-Start DTF Conveyor.
- Your DTF transfer can now be pressed onto your shirt or stored for later use.
These directions were created using Lawson's DTF Transfer Powder and Lawson's DTF Film. Using other brands many vary these instructions. Testing prior to production is always recommended.
Prestige DTF Printer Cleaning Solution
NOTE: Color may vary
Prestige DTF Printer Cleaning Solution is suitable for running maintenance on DTG and DTF printing machines, including the Prestige A3+ Desktop DTF Printer and more! Using this solution regularly will extend the life of your printer.
Isopropyl Alcohol 16oz
99% Isopropyl alcohol can clean your water-based digital inks and it can remove unwanted ink splashes without scratches, unlike regular alcohol.
Use this ONLY on Printhead Guards, Encoder Strip, Encoder Wheels, and Platens or areas where unwanted ink splashes on metals/ plastic. Please note this may change/damage certain paints on metal or plastic. Use with care.
*Please contact us if you are not sure whether this product would be a good solution.
Use this product with our lint-free wipe.
Do not use this product on printheads, capping station, wiper blade, and any other areas not specified above. Please note that this product can damage your parts if used improperly. It is also not intended for use on the skin.
Wash face, hands, and any exposed skin thoroughly after handling the product.
Do not insert this into the tube/ lines.
When using this product do not eat, drink or smoke. Please wear protective gloves/protective clothing/eye protection/face protection.
Lint Free Wipes 4" x 4" - 30 Sheets
Ultra soft, non-abrasive, lint-free wipes are designed for sensitive surfaces such as printhead and encoder strip.
They are 99.999% pure and guaranteed safe for cleaning printhead surface, encoder strip and capping station.
Great for printhead overnight soaking / locking.
7" Cleaning Swabs - 50 Each
Cleaning Swabs to use alongside printers.
These Foam Cleaning Swabs are perfect for detailed cleaning on various parts of 's printers. Available in packs of 50 swabs each.
Features
- Foam Head
- Pairs well with all printers
Benefits
- Narrow form allows for detailed cleaning of small parts/areas
Specifications
- Swab Material: Foam
- Swab Length: 7 inches
- Quantity: 50 swabs in each pack
