Owning the Epson SureColor F1070 means having one of the most versatile hybrid DTG/DTF printers on the market. However, high-performance equipment requires consistent care. To prevent clogged nozzles and ensure vibrant color reproduction, follow this essential maintenance guide.
Daily Maintenance (5 Minutes)
Don't let your UltraChrome DG2 Ink sit stagnant. Follow these steps every morning:
- Nozzle Check: Run a nozzle check print to ensure all channels are firing.
- Ink Agitation: Gently remove and shake the White ink packs to prevent titanium dioxide settlement.
- Internal Inspection: Check for any lint or dust buildup around the platen area.
Weekly Maintenance (15 Minutes)
Properly cleaning the "gutters" of your printer will save you thousands in repair costs.
- Clean the Wiper Unit: Use Foam Cleaning Swabs and Epson Cleaning Solution to wipe the edges of the Print Head Wiper Unit.
- Cap Cleaning: Clean the rubber seal around the capping station to ensure an airtight seal when the printer is off.
- Empty Waste Ink: Check your Waste Maintenance Box. If it’s near 80% full, replace it now to avoid an automatic mid-print stoppage.
Signs You Need New Supplies
If you notice banding or "dusty" looking prints even after a cleaning cycle, it may be time to replace your consumables. Ensure you are using Genuine Epson F1070 Parts to maintain your warranty and print head health.