Premium Hot Peel Direct-to-Film (DTF) Film

Create Stunning Prints with the Hot Peel DTF Heat Transfer Film

This is the best hot peel direct to transfer (DTF) film sheets and rolls. Works with all direct-to-film (DTF) and direct-to-garment (DTG) printers. Using this Hot Peel DTF film saves you time because you can immediately peel the transfer paper without waiting. The hot peel film provides better color and a softer feel. Use these DTF films on a variety of tshirts, hoodies and more. They work great on cotton and polyester.

Once printed, the DTF film works similar to a heat transfer. Apply with a heat press and then peel the film off.

Out of your size?  Check out the Hybrid Warm/Cold Peel DTF Film!

Direction - How to Apply the DTF Transfer Hot Peel Film

1. Apply Lawson's DTF powder to the printed film.
2. Once your image is on the film and the DTF powder is applied and cured, set your heat press somewhere between 275 - 300 degrees.
   
3. Place the DTF transfer on your garment, powder side down. You may cover with a piece of DTF Transfer paper to protect your heat press if you want.
4. Press for about 12 - 17 seconds with medium pressure, depending on temperature and garment.
5. Lift up the heat press and peel immediately.
   
6. For a softer feel, after peeling the paper, place a teflon sheet over the image and press for about 5 seconds with medium pressure.
   

These directions were created using Lawson's DTF Transfer Powder and Lawson's DTF Film. Using other brands many vary these instructions. Testing prior to production is always recommended.