Curing Plastisol Ink with a Lawson Flash Cure Pad

Curing Plastisol Ink with a Lawson Flash Cure Pad

Description


The Lawson Flash Cure Pad attaches to any Lawson Super or Econo Flash Cure Units. Just attach the pad to the flash dryer with a secure amount of space between the flash unit and pad to prevent any scorching or from taking too long to cure.


To use the Lawson Flash Cure Pad, simply screen print on your garment, then take off the garment and put in on the pad, and swing the heating element back over the garment. Move on to printing the next garment. Check to make sure that before removing the garment from the pad, that the plastisol ink is cured.


For additional assistance you can always call us at 314.382.9300 or fill our our Contact Form. We are here to help you screen print better.

Back to blog