Hybrid Warm/Cold Peel Direct-to-Film (DTF) Film

Hybrid Warm and Cold Peel DTF Heat Transfer Film

Experience the versatility of our Hybrid Warm/Cold Peel Direct-to-Film Film! Our DTF transfer film is perfect for both warm and cold peels, making it a must-have for any garment. Made to be compatible with cotton, polyester, and more, this film is a game-changer in the world of transfers.

Lawson's Hybrid Warm and Cold Peel film combines two great options into one choice. Use the warm peel feature when you want faster production and a softer hand (feel) to your finished press. Or, peel these DTF transfers cold to get an even brighter, more vibrant color on your tshirt, hoodie or tote bag.

Direction - How to Apply the DTF Transfer Hot Peel Film

1. Apply Lawson's DTF powder to the printed film.
2. Once your image is on the film and the DTF powder is applied and cured, set your heat press somewhere between 275 - 300 degrees.
   
3. Place the DTF transfer on your garment, powder side down. You may cover with a piece of DTF Transfer paper to protect your heat press if you want.
4. Press for about 12 - 17 seconds with medium/heavy pressure, depending on temperature and garment.
5. Lift up the heat press. For the warm press, wait approximately 3 seconds and then peel. For the cold press, allow the transfer to become cold.
   
6. For a softer feel, after peeling the paper, place a teflon sheet over the image and press for about 5 seconds with medium pressure.

These directions were created using Lawson's DTF Transfer Powder and Lawson's DTF Film. Using other brands many vary these instructions. Testing prior to production is always recommended.