Prestige R2 Pro 13" DTF Printer with Supplies (Virtual Training)

Most shops that land on the Prestige R2 Pro bundle aren’t just testing DTF anymore — they’ve already proved it works and now need something that can handle real orders without blowing up the budget or the floor plan. A single-sheet desktop printer is always busy, gang sheets pile up, and you end up babysitting clogs instead of staging jobs. The R2 Pro is built for that “step two”: a 13" roll‑fed DTF printer that still fits on a table, but finally moves at a true production pace.

This bundle locks in more than just the hardware. You get dual Epson i1600 printheads driving a CMYK+White ink set, bulk ink tanks, white ink circulation, and a tuned RIP, plus the film, powder, and ink you need to start printing real jobs right away. At typical production settings, the R2 Pro can put out around 30–35 square feet per hour — roughly 180 full‑size shirt fronts over an 8‑hour day — which is where many shops see DTF go from “add‑on” to “core production lane."
What makes this particular package different is how you learn to use it. Instead of dropping a crate on your dock and leaving you to figure it out, Lawson includes live virtual training from the same technicians who run and support these printers every day. They walk your team through installation, RIP setup, DTF film/powder workflow, and daily maintenance using your artwork and your jobs, so you’re ready to start charging for prints as soon as the training session ends.
If you’re ready to move beyond trial‑and‑error DTF and into repeatable, daily production — but you’re not quite ready for a 24" or 36" machine — the Prestige R2 Pro with supplies and virtual training is built to be that reliable middle step.

Plenty of sellers can ship you an R2 Pro and a starter kit. Very few make sure your team actually knows how to run it before you start taking paid orders.

With Lawson Workhorse Group, you get a complete, guided start. Our technicians connect with you live, walk through the setup, show you how to load media, configure the RIP, manage white ink, and apply powder and curing profiles that match your presses and garments. You’re not just watching a generic video — you’re seeing your art, your film, and your shirts moving through a real DTF workflow.

Because Lawson supports equipment out of St. Louis, Missouri and Marietta, Georgia, with satellite coverage extending to Phoenix, Orlando, and Des Moines, you also have a team you can reach by phone when something changes. New substrates, new art styles, or a maintenance question on a busy morning — you’re talking to the same group that trained you, not a random call center.
For shops that are serious about DTF becoming part of their day‑to‑day business, that mix of a capable 13" printer, bundled supplies, and direct access to people who actually run these machines is often the difference between a smooth start and months of frustration.

Dual Epson i1600 printheads for stronger reliability and production speed than entry‑level 13" units.

13" (33 cm) print width on roll media, sized for compact shops that still need roll‑to‑roll DTF.

Approximately 30–35 sq ft/hr at production resolution, translating to about 180 full‑size 12" × 14" transfers in an 8‑hour shift.

Bulk 1 L CMYK+White ink system with a dedicated white ink management/stirring system to keep white channels stable.

Active and passive auto‑cleaning plus auto‑capping to reduce manual maintenance and protect printheads over time.

Windows‑based RIP (neoStampa / DigiRIP / DTF Station software) tuned for DTF color workflows and white ink layering.

Compact footprint (roughly 33.6" × 25.3" × 20.9"; about 125 lb), so it can live on a sturdy table near your presses.

Bundle includes starter DTF supplies (ink, film, powder) plus live virtual training, so you can go from crate to production quickly.