Blazer Textile Conveyor Dryer
The Lawson Blazer screen printing conveyor dryer is designed for complete flexibility and maximum versatility. The Blazer features a fully modular design and can be easily customized and expanded whenever your needs may change. This custom screen printing machine is the ideal dryer to maximize your investment dollars.
View Brochure 
Finance
Email UsBlaze Your Own Path
-
Standard Features
- Up-Front, Side-Mounted Digital Control Panel
- Diagnostic Digital Control/Monitor System
- Arrow Belt™ Tracking System
- Solid-State Electronic Temperature Controller
- Adjustable Temperature Up To 395oF
- Complete-Wrap Insulation Package
- Triple-Wall Construction
- Conveyor Belt Supports
- Direct-Drive Conveyor System
- Moveable Heat Chamber
- Solid-State Digital Belt Speed Controller
- Four (4)-Point Belt-Tracking
- Heat Reflective "S & S Memory Belt"
- Reflective Heat "Booster Lining"
- Rugged, Solid-Steel Construction
- Adjustable Entrance and Exit Door Opening
- Hinged Top For Easy Access
- Exit Exhaust Hood
- 15 Year I.R. Heater Warranty
- 3 Year Defective Parts Warranty
- 24/7/365 Technical Support
Optional Features
- Additional In-Feed or Out-Feed Belt Extensions...add as much length as desired to customize your dryer.
- Quartz Chamber/Jet-Air with Electric-Eye Sensor
- Additional I.R./Jet-Air 3' Module
- Turbo-Cooler 3' Module
- Gas I.R./Jet-Air 3' Module
- Split Belt Options
- Custom Belt-to-Heater Clearance Height
- Custom Design Features for Special Needs/Applications
- Export Electrics
-
-
Model #24 #36 #48 #60 Heater Element Parts Warranty 15 Years 15 Years 15 Years 15 Years Defective Parts Warranty 3 Years 3 Years 3 Years 3 Years Belt Width 24" 36" 48" 60" Estimated Overall Width 38" 50" 62" 74" Estimated Overall Height 51" 51" 51" 51" Estimated Overall Length Varies
Standard sizes: 8", 12", 16"Varies
Standard sizes: 8", 12", 16"Varies
Standard sizes: 8", 12", 16"Varies
Standard sizes: 8", 12", 16"Heater Size (Width) 24" 36" 48" 60" I.R./Jet-Air: 230, 1-Phase, Amps (3 wires + ground)
(each I.R. heat chamber)28 42 54 68 Heater Wattage
(each I.R. heat chamber)6000 9000 12000 15000 Estimated Cost/hr to Operate (based on 10 cents/kwh) $0.60 $0.90 $1.20 $1.50 Air-Zone - High-Pressure Hot Air Jet Plenum 1 1 1 1 Estimated Max. Production - Plastisol* 270+ 325 480 570 Estimated Max. Production - DTG/Digital* 72 144 200 250 Quartz/Jet-Air, 220, 1-Phase, Amps
(each heat chamber)27 39 51 63 Quartz/Jet-Air, 220, 3-Phase, Amps
(each heat chamber)21 30 39 48 Air-Knives 6 6 6 6 Estimated Max. Production* 240 325 480 570 I.R. Gas/Jet-Air, 120, 1-Phase, Amps 3 3 5 5 Air-Zones 1 1 1 1 Estimated Max. Production* 240 325 480 570 Heater Element Warranty 15 Years 15 Years 15 Years 15 Years Defective Parts Warranty 3 Years 3 Years 3 Years 3 Years *Free Ground Shipping on Parts; No Charge Labor for Items Sent Back to St. Louis for Repair or Replacement
*Price, Design, and Technical Specifications Subject to Change Without Notice
-
-
-
Blazer Warranty
-
Arrow Belt For Perfect Tracking
Lawson's exclusive state-of-the-art Arrow Belt Tracking System guarantees perfect belt tracking. The belt cannot move from side-to-side, as it is guided by Lawson's exclusive "tongue-n-groove" belt and pulley system.
-
Digital Dryer Control Panel
Lawson features state-of-the-art digital monitoring and troubleshooting. Visually see dryer set-point and operating temperature, incoming voltage, amperage, current/watts and energy usage!
-
Easy Access Heat Chamber
Another Lawson Exclusive - Easy-Access Heat Chamber!
Simply lift the hinged heat chamber top up, to gain total access to the heat chamber, heating elements and jet-air plenums - all without disconnecting any wires, and without any tools.
Always Disconnect Main Power Before Servicing! -
No Maintenance, Direct Drive Conveyor
Lawson features a DIRECT DRIVE motor conveyor system.
There are no dirty, greasy chains to adjust! Changing motor drive ratios is simple as changing the easy-access motor (no belt to remove, and no chain to adjust).
The Blazer also features a reversible belt, and digital display for repeatable curing speeds.
Note that the conveyor system has its own 120 volts, standard plug-in wiring cord. You'll plug this in seperately from the power supplied to each heat chamber.
Also notice the Integrated Exhaust Hood at the dryer exit - standard on every Blazer. (it is the customer's responsibility to install a powered exhaust, if they so choose) -
Recirculated Hot-Air Jet-Air Blowers
Lawson uses Hot-Air Jet Plenum(s) to forcefully direct air-pressure downward on the garment to increase production, and to minimize scorching. And the hot-air also blows directly through the I.R. Heating Elements in addition to the jet plenums.
-
Blazer Single Heat Chamber
This photo shows our modular heat chamber. You can move this chamber easily along the rails so you can have any in-feed or out-feed that you want...and you can change it anytime you want.
Also, each Heat Chamber is individually wired so you have ultimate control and redundacy. Your electrician will wire each heat chamber so you will have a breaker for each chamber. -
Blazer XL Control Panel Home Screen
The Blazer XL control panel is a color touch screen that displays all essential controls, all the time.
This Easy-to-See Display features set-point temperature, actual temperature, temperature-ready, Hi and Low temperature visual alarms, belt speed, heat chamber retention time, heat zone functions, reversable belt directions, PRESET control functions, JOB Recall, and much more.
Note: The XL Color Touch Screen Control Panel is an Optional Feature -
Blazer XL Control Panel Presets
The Blazer XL allows you to define as many Preset functions as you want.
Describe the type of substraite, set heat chamber retention time/belt speed, and temperature
You can also recall Job Numbers and have prior dryer settings automataically used.
Note: The XL Color Touch Screen Control Panel is an Optional Feature -
Blazer XL Control Panel Belt Speed Entry
The XL allows you ultimate control of retention time in the heat chamber.
Note: The XL Color Touch Screen Control Panel is an Optional Feature -
Blazer XL Control Panel Cool Down Screen
This image is showing the Blazer XL in COOL DOWN MODE. The intelligent control system will turn off the heat and keep the blower and belt running for 20 minutes and then shut-down.
Note: The XL Color Touch Screen Control Panel is an Optional Feature
-
Digital Controls - State-of-the-art monitoring of Temperature, Voltage, Amperage, Current and Energy Usage.Digital Belt Speed Controls with Display - Featuring a Reversible Conveyor Belt, and Digital Conveyor Speed Monitoring for Repeatable Curing Times.Reversible Belt Direction - you are in control of your workflow, and you can change directions anytime you want without having to re-track your belt.Triple Wall Insulation to maintain heat chamber temperature and energy-efficiency. The Blazer's bottom is even insulated!
It is designed for curing both plastisol and water-based inks. The basic conveyor is only 8' long, and includes one 3' heat chamber/curing module of your choosing.You can add any amount of heat chambers/curing modules at any time, even years later.
Select a standard belt width and standard length conveyor belt, or create a custom width and length that fits your specific needs. You can always increase the in-feed or out-feed of the Blazer anytime you want - this is a totally modular dryer!
1) Start by selecting the Width Conveyor Belt that you want:
Standard Belt Widths: 24", 36", 48", 60"
2) Then select how Long you want your dryer to be:
Standard Belt Lengths: 8', 12', 16', 19'
The Lawson Blazer allows you to select from a variety of curing options and heat modules.
3) Now select one of the following 3' Heat Chamber Modules:
A) I.R. with Jet-Air (most popular module)
B) Quartz with Jet-Air (includes an energy saving photo garment sensor for instant on/off and is a great production booster)
C) Gas I.R. with Jet-Air (ideal for those with limited power availability and who want a small gas I.R. dryer)
D) Jet-Air Cooling Modules
E) Split Belt Designs (2 or 3 belt designs available)
All heat chambers are specifically designed to maximize energy efficiency and are double insulated. If you are looking for a conveyor dryer that saves space and energy, and still provides maximum production,then the Blazer is an ideal companion to manual or automatic presses.
Custom lengths are easily accommodated
