Ulano CDF-25 Mesh Prep | Ready To Use

Helps ensure uniform adhesion of CDF Direct Capillary Films by making the mesh hold more water. Use immediately before adhering the film.

A ready-to-use liquid mordant that promotes fabric water retention and, thus, the uniform adhesion of all Direct Films. All Mesh Prep is especially helpful for use with thin CDF® Direct Films applied to fine fabric, which inherently holds little water. All Mesh Prep No. 25 rinses easily from the screen with hot or cold water. Non-caustic - will not harm frames, fabric, or adhesives on stretch and glue frames. Recommended for use with all CDF® Direct Films. Do not use on natural silk.

Apply All Mesh Prep No. 25 only after the fabric has been thoroughly degreased and immediately before adhering the Direct Film.
Rinse both sides of the screen thoroughly with water.
Apply All Mesh Prep No. 25 with a medium-stiff, long bristle nylon brush to both sides of the screen.
Let the screen stand for one or two minutes.
Rinse the screen thoroughly from both sides with hot or cold water.
All Mesh Prep No. 25 should be used no more than one hour before adhering the film. If you do not proceed immediately to adhere the Direct Film, re-wet the screen just before adhering the film.

Additional Information
Click Here for Technical Data Sheet